Schulich Information Services
HOW TO: Scan to USB on a Toshiba eStudio
The Scan to USB function stores scans to a USB storage device when a USB storage device is connected.
Instructions
1. Place the original(s).
2. On the control panel, press the [SCAN] button to enter the SCAN menu.
3. To store scans in a USB storage device, connect the device to the equipment and wait a few seconds.
4. When “Found USB DEVICE.” message appears on the touch panel, press [USB].
5. Define the settings for the new file as required.
Press [FILE NAME] to change the file name.
2) Select an option for each of the FILE FORMAT, MULTI/SINGLE PAGE and SECURITY settings.
3) After the settings are done, press [OK].
6. Press [SCAN] to scan data.
7. If you have another page to scan, place another original on the original
glass and press [SCAN] or the [START] button to continue scanning. To finish the job, press [JOB FINISH], followed by the [FUNCTION CLEAR] button.
Related articles
e: helpdesk@schulich.uwo.ca
p: 519-661-2111 ext 81377